The EVVA 12-G21 compressed air distributor is primarily used as an end distributor in compressed air distribution and is installed directly in the workplace area. The EVVA 12-G21 compressed air distributor has a shut-off ball valve G 1/2 "i at the inlet and can thus be installed individually on an existing compressed air pipeline. The compressed air then flows into the EVVA 12-G21 compressed air manifold and can be extracted via the quick-release couplings for the compressed air applications. The middle outlet is closed with a self-sealing screw plug. Depending on the requirements, this can be removed and a 3rd quick-release coupling can be installed. The EVVA 12-G21 compressed air distributor can thus be adapted very quickly to higher compressed air requirements. For installations in clean room technology, or for other individual requirements for the compressed air distribution, the threading option at the rear can be used and an additional compressed air inlet, or even compressed air outlet, can be created. In order to protect installed tools and machines, the condensate produced can be drained manually from the EVVA 12-G21 compressed air distributor. This increases safety and prevents increased wear. Mounting is possible on machine and system parts, as well as on walls and ceilings.
Special features:
- shut-off ball valve with full bore glued in with profile sealing ring made of PTFE for gap sealing!
- Tightening torque thread plastic: 4 Nm
- Tightening torque thread brass: 15 Nm
- Mounting hole: 4 x 6 mm
- Sealing ring made of PTFE for quick-connect couplings
- Compressed air manifold VDK 35 complete with attachments (1 pc. (1 shut-off ball valve, 2 quick-connect couplings, 1 screw plug with sealing ring, 1 condensate drain valve)
- Pay attention to areas subject to frost
- Threaded connections are preferably provided for cylindrical threads (G)
- Brass threaded inserts in the outlet at the bottom and at the front
- Threaded inserts are twist-proof
- Condensate drain valve glued in with PVC sealing ring for gap sealing!
- Screw in conical thread (R) with care and observe torque! - Ball valve with large passage
- Hole spacing: 70 x 45 mm (WxH)
- Medium compressed air, other operating temperatures and media on request
- After installation, the compressed air pipe can be blown out as quick-action coupling NW 7.2 only pre-assembled
- Nominal volume flow at 6 bar approx. 0.5 bar pressure difference
- Rear threaded connection Rp 1/2 "i can be made subsequently by drilling and thread cutting
Technical data:
- Dimension: 121(134)x127x76 mm
- Connection: vertical/top
- Max. operating pressure: 15 bar
- Operating temperature: -20°C to +50°C
- Flow rate: 1,466 l/min
- Color: Gray
- Thread inside: G 1/2"
- Coupling type: Quick coupling
- Length: 121(134) mm
- Material: Plastic
- Product type: Accessories
- Connection type: Screw connection
