The compressed air end distributor EVVASM 22-1 is primarily used as an end distributor in compressed air distribution. The compressed air end distributor EVVASM 22-1 has a screw-in connector in the inlet, a shut-off ball valve with full bore and can thus be installed directly on an existing compressed air pipeline. Compressed air flows into the EVVASM 22-1 compressed air end manifold and can be withdrawn via the quick disconnect coupling for compressed air applications. The shut-off ball valve can be used to depressurize the EVVASM 22-1 compressed air end distributor, or subsequent compressed air applications, and to easily replace a defective quick-action coupling. To protect installed tools and machines, the condensate produced can be drained manually from the EVVASM 22-1 compressed air end distributor. This increases safety and prevents increased wear. For installations in clean room technology, or other individual requirements for compressed air distribution, the threading option at the rear can be used to create an additional compressed air inlet, or even compressed air outlet. The mounting is possible on machine and plant parts and on walls and ceilings.
- The 22 mm brass screw-in connector greatly facilitates installation with the appropriate plastic or aluminum piping from KDT. Please make sure that the compressed air pipe has been inserted at the correct insertion depth and is clamped by the internal retaining claw!
- KDT compressed air pipe 22 mm outer diameter
- shut-off ball valve glued in with profile sealing ring made of PTFE for gap sealing
- tightening torque threaded core brass: max. 15 Nm
- mounting hole: 4 x 6 mm
- compressed air take-off with quick-action coupling NW 7.2 with profile sealing ring made of PTFE for gap sealing - Compressed air inlet with screw-in connector 22 mm glued in with sealing ring made of PVC for gap sealing
- Compressed air distributor VDK 31 complete with attachments (1 pc. screw-in connector, 1 pc. shut-off ball valve, 1 pc. quick-acting coupling, 2 pcs. screw plug, 1 pc. condensate drain valve)
- Pay attention to frost endangered areas!
- Threaded connections are preferably intended for cylindrical threads (G)
- Screw in conical threads (R) with care and observe torque!
- Hole spacing: 70 x 48 mm (WxH)
- Medium compressed air, other operating temperatures and media on request!
- Nominal volume flow at 6 bar approx. 0.5 bar pressure difference
- Rear threaded connection Rp 1/2 "i can also be produced subsequently by drilling and thread cutting
- Quick-action coupling only pre-assembled, after installation the compressed air pipe can be blown out!
- Dimension: 175 (188)x85x84 mm
- Connection: vertical/top
- Max. operating pressure: 15 bar
- Operating temperature: -20°C to +50°C
- Flow rate: 1,166 l/min
- Diameter: 22 mm
- Color: gray/black
- Coupling type: quick-connect coupling
- Length: 175 (188) mm
- Material: plastic
- Product type: pipes
- Width across flats: 32 mm
- Connection type: plug-in connection