The DVSK 18-2 compressed air through-distributor is primarily installed at those points in the compressed air distribution system where, in addition to through-distribution, the tapping of compressed air is also required. The compressed air flows through the DVSK 18-2 compressed air through-distributor and can be taken off via the quick-release couplings.
- The 18 mm plastic plug-in connector greatly facilitates installation with the corresponding plastic or aluminum piping from KDT. Please make sure that the compressed air pipe has been inserted at the correct insertion depth and is clamped by the internal retaining claw!
- KDT compressed air tube 18 mm outer diameter
- Tightening torque thread core brass: max. 15 Nm
- Mounting hole: 4 x 6 mm
- Operating pressure for connector/plastic: max. 10 bar at +23°C / max. 8 bar at +50°C
- Compressed air tapping with quick-connect coupling NW 7.2 with profile sealing ring made of PTFE for gap sealing
- Compressed air manifold VDK 21 complete with attachments (2 pcs. screw-in connectors, 2 pcs. quick-connect coupling)
- Pay attention to areas subject to frost!
- Threaded connections are preferably intended for cylindrical threads (G)
- Screw in conical threads (R) with care and observe torque!
- Hole spacing: 70 x 48 mm (WxH)
- Medium compressed air, other operating temperatures and media on request!
- Nominal volume flow at 6 bar approx. 0.5 bar pressure difference
- Rear threaded connection Rp 1/2 "i can also be produced subsequently by drilling and thread cutting
- Quick-connect couplings only pre-assembled, after installation the compressed air pipe can be blown out!
- Dimension: 134x93x64 mm
- Connection: axial
- Max. operating pressure: 10 bar
- Operating temperature: -20°C to +50°C
- Flow rate: 1,466 l/min
- Diameter: 18 mm
- Color: Grey/Black
- Coupling type: Quick-connect coupling
- Length: 134 mm
- Material: Plastic
- Product type: Pipes
- Width across flats: 30 mm
- Connection type: Plug-in connection