1. Home
  2. Druckluftverteilung
  3. Druckluftverteiler
  4. Compressed air manifold EMSM 15-212 Ø inside 15 mm coupling 2-fold G 1/2" brass gold
Hotline: +49 (0)7121 580002|E-Mail: info@druckluft-versandhandel.de
"
KDT

Compressed air manifold EMSM 15-212 Ø inside 15 mm coupling 2-fold G 1/2" brass gold

Item no.: 440022
Druckluftverteiler EMSM 15-212 Ø innen 15 mm Kupplung 2-fach G 1/2 Messing Gold
KDT
KDT

Compressed air manifold EMSM 15-212 Ø inside 15 mm coupling 2-fold G 1/2" brass gold

Item no.: 440022
24,95 €
with payment in advance only 24,20 €
Weight: 0,28 kg
incl. VAT plus Shipping costs Depending on the delivery address, the VAT in the shopping cart may vary.
Delivery time 1-3 working days (06.07.2022 - 08.07.2022)
In stock: 11 Stk.
Additional quantities within 10 working days.
Would you like help over the phone?
Use our free callback service
  • Description
    The EMSM 15-212 compressed air inlet manifold is installed where the compressed air from the compressor must be fed into the compressed air pipeline. The connecting hose from the compressor is connected directly to the EMSM 15-212 compressed air inlet manifold. The compressed air then flows through the input manifold, via the screw-in connector into the plugged-in compressed air pipe, and can also be tapped for blowing work in the compressed air generation area via the quick-release couplings.


    Note:
    The 15 mm brass screw-in connector greatly facilitates installation with the corresponding plastic or aluminum piping from KDT. Please make sure that the compressed air pipe has been inserted at the correct insertion depth and is clamped by the internal retaining claw!


    Special features:
    - Tightening torque thread plastic: 4 Nm
    - Mounting hole: 4 x 4.6 mm - Pre-assembled ready for operation!
    - Operating pressure for brass connector: max. 15 bar at +23°C / max. 15 bar at +50°C
    - Sealing rings made of PVC
    - Compressed air outlet with quick-action coupling NW 7.2
    - Compressed air outlet with plug connector brass 15 mm
    - Compressed air inlet with reducer Rp 1/2 "i x R 1/2 "a with long internal thread glued in with profile sealing ring made of PTFE for gap sealing
    - Compressed air distributor VDK 338 complete with attachments (1 pc. screw-in plug connector, 1 pc. reducer, 2 pc. quick-acting coupling)
    - Note frost endangered areas!
    - Threads made of plastic
    - Threaded connections are preferably intended for cylindrical threads (G)
    - Screw in conical threads (R) with care and observe torque!
    - Hole spacing: 46 x 36.5 mm (WxH)
    - Medium compressed air, other operating temperatures and media on request!
    - Nominal volume flow at 6 bar approx. 0.5 bar pressure difference
    - Rear threaded connection Rp 1/2 "i can also be made subsequently by drilling and thread cutting.


    Technical data:
    - Dimension: 99x93x64 mm
    - Connection: axial
    - Max. operating pressure: 15 bar
    - Operating temperature: -20°C to +50°C
    - Flow rate: 800 l/min
    - Diameter: 15 mm
    - Color: Grey/Gold
    - Coupling type: Quick coupling
    - Length: 99 mm
    - Material: Plastic
    - Product type: Pipes
    - Width across flats: 24 mm / 21 mm
    - Connection type: Plug-in connection
Description
The EMSM 15-212 compressed air inlet manifold is installed where the compressed air from the compressor must be fed into the compressed air pipeline. The connecting hose from the compressor is connected directly to the EMSM 15-212 compressed air inlet manifold. The compressed air then flows through the input manifold, via the screw-in connector into the plugged-in compressed air pipe, and can also be tapped for blowing work in the compressed air generation area via the quick-release couplings.


Note:
The 15 mm brass screw-in connector greatly facilitates installation with the corresponding plastic or aluminum piping from KDT. Please make sure that the compressed air pipe has been inserted at the correct insertion depth and is clamped by the internal retaining claw!


Special features:
- Tightening torque thread plastic: 4 Nm
- Mounting hole: 4 x 4.6 mm - Pre-assembled ready for operation!
- Operating pressure for brass connector: max. 15 bar at +23°C / max. 15 bar at +50°C
- Sealing rings made of PVC
- Compressed air outlet with quick-action coupling NW 7.2
- Compressed air outlet with plug connector brass 15 mm
- Compressed air inlet with reducer Rp 1/2 "i x R 1/2 "a with long internal thread glued in with profile sealing ring made of PTFE for gap sealing
- Compressed air distributor VDK 338 complete with attachments (1 pc. screw-in plug connector, 1 pc. reducer, 2 pc. quick-acting coupling)
- Note frost endangered areas!
- Threads made of plastic
- Threaded connections are preferably intended for cylindrical threads (G)
- Screw in conical threads (R) with care and observe torque!
- Hole spacing: 46 x 36.5 mm (WxH)
- Medium compressed air, other operating temperatures and media on request!
- Nominal volume flow at 6 bar approx. 0.5 bar pressure difference
- Rear threaded connection Rp 1/2 "i can also be made subsequently by drilling and thread cutting.


Technical data:
- Dimension: 99x93x64 mm
- Connection: axial
- Max. operating pressure: 15 bar
- Operating temperature: -20°C to +50°C
- Flow rate: 800 l/min
- Diameter: 15 mm
- Color: Grey/Gold
- Coupling type: Quick coupling
- Length: 99 mm
- Material: Plastic
- Product type: Pipes
- Width across flats: 24 mm / 21 mm
- Connection type: Plug-in connection
Cookie Settings

We use different types of cookies to make our website better and smarter. These include cookies that are strictly necessary for the operation of the website, statistical cookies that help us better understand usage patterns, comfort cookies that allow us to offer various functions and services, and personalization cookies to provide you with content tailored to your interests.

Lauto law, we may store cookies on your device if they are strictly necessary for the operation of this website. For all other cookie types we need your permission. You may no longer be able to use all the functions of the website due to your settings.

Privacy policy
Legal notice