1. Home
  2. Druckluftverteilung
  3. Druckluftverteiler
  4. Compressed air manifold EMVM 15-2, Ø 15 mm Coupling 2-fold compression fitting Ms
Hotline: +49 (0)7121 580002|E-Mail: info@druckluft-versandhandel.de
"
KDT

Compressed air manifold EMVM 15-2, Ø 15 mm Coupling 2-fold compression fitting Ms

Item no.: 430030
Druckluftverteiler EMVM 15-2, Ø 15 mm Kupplung 2-fach Klemmringverschraubung Ms Druckluftverteiler EMVM 15-2, Ø 15 mm Kupplung 2-fach Klemmringverschraubung Ms Druckluftverteiler EMVM 15-2, Ø 15 mm Kupplung 2-fach Klemmringverschraubung Ms Druckluftverteiler EMVM 15-2, Ø 15 mm Kupplung 2-fach Klemmringverschraubung Ms
KDT
KDT

Compressed air manifold EMVM 15-2, Ø 15 mm Coupling 2-fold compression fitting Ms

Item no.: 430030
33,12 €
with payment in advance only 32,13 €
Weight: 0,30 kg
incl. VAT plus Shipping costs Depending on the delivery address, the VAT in the shopping cart may vary.
Delivery time 1-3 working days (04.10.2022 - 06.10.2022)
In stock: 31 Stk.
Additional quantities within 10 working days.
Would you like help over the phone?
Use our free callback service
  • Description
    The EMVM 15-2 compressed air end distributor is primarily installed at the points in the compressed air distribution where compressed air is required at the workplace. The compressed air then flows into the EMVM 15-2 compressed air end distributor and can be removed via the quick-release couplings. In order to protect installed tools and machines, any condensate that accumulates can be manually drained from the EMVM 15-2 compressed air end manifold using the condensate drain valve. This increases safety and prevents increased wear. Mounting is possible on machine and plant parts and on walls.


    Note:
    The brass 15 mm compression fitting greatly facilitates installation with the appropriate plastic or aluminum piping from KDT. Please make sure that the compressed air pipe is inserted at the correct insertion depth, that the clamping ring is present and that the correct support sleeve has been inserted for plastic pipes!


    Special features:
    - Tightening torque thread plastic: 4 Nm
    - Mounting hole: 4 x 4.6 mm
    - Compressed air intake with quick-release couplings NW 7.2 with sealing rings made of NBR(P) sealed ready for operation!
    - Compressed air inlet with compression fitting 15 mm glued in with seal made of PVC for gap sealing
    - Compressed air manifold VDK 438 complete with attachments (1 pc. compression fitting, 2 pc. quick disconnect couplings, 1 pc. condensate drain valve)
    - Pay attention to areas subject to frost!
    - Thread made of plastic
    - Threaded connections are preferably provided for cylindrical threads (G)
    - Condensate drain valve glued in with seal made of PVC for gap sealing!
    - Screw in conical threads (R) with care and observe torque!
    - Hole spacing: 46 x 36.5 mm (WxH)
    - Medium compressed air, other operating temperatures and media on request!
    - Nominal volume flow at 6 bar approx. 0.5 bar pressure difference
    - Rear threaded connection Rp 1/2 "i can also be made subsequently by drilling and thread cutting.


    Technical data:
    - Dimension: 97(110)x93x64 mm
    - Connection: axial
    - Max. operating pressure: 15 bar
    - Operating temperature: -20°C to +50°C
    - Flow rate: 800 l/min
    - Diameter: 15 mm
    - Color: Grey/Gold
    - Coupling type: Quick coupling
    - Length: 97(110) mm
    - Material: Plastic
    - Product type: Pipes
    - Width across flats: 24 mm
    - Connection type: Clamp connection
Description
The EMVM 15-2 compressed air end distributor is primarily installed at the points in the compressed air distribution where compressed air is required at the workplace. The compressed air then flows into the EMVM 15-2 compressed air end distributor and can be removed via the quick-release couplings. In order to protect installed tools and machines, any condensate that accumulates can be manually drained from the EMVM 15-2 compressed air end manifold using the condensate drain valve. This increases safety and prevents increased wear. Mounting is possible on machine and plant parts and on walls.


Note:
The brass 15 mm compression fitting greatly facilitates installation with the appropriate plastic or aluminum piping from KDT. Please make sure that the compressed air pipe is inserted at the correct insertion depth, that the clamping ring is present and that the correct support sleeve has been inserted for plastic pipes!


Special features:
- Tightening torque thread plastic: 4 Nm
- Mounting hole: 4 x 4.6 mm
- Compressed air intake with quick-release couplings NW 7.2 with sealing rings made of NBR(P) sealed ready for operation!
- Compressed air inlet with compression fitting 15 mm glued in with seal made of PVC for gap sealing
- Compressed air manifold VDK 438 complete with attachments (1 pc. compression fitting, 2 pc. quick disconnect couplings, 1 pc. condensate drain valve)
- Pay attention to areas subject to frost!
- Thread made of plastic
- Threaded connections are preferably provided for cylindrical threads (G)
- Condensate drain valve glued in with seal made of PVC for gap sealing!
- Screw in conical threads (R) with care and observe torque!
- Hole spacing: 46 x 36.5 mm (WxH)
- Medium compressed air, other operating temperatures and media on request!
- Nominal volume flow at 6 bar approx. 0.5 bar pressure difference
- Rear threaded connection Rp 1/2 "i can also be made subsequently by drilling and thread cutting.


Technical data:
- Dimension: 97(110)x93x64 mm
- Connection: axial
- Max. operating pressure: 15 bar
- Operating temperature: -20°C to +50°C
- Flow rate: 800 l/min
- Diameter: 15 mm
- Color: Grey/Gold
- Coupling type: Quick coupling
- Length: 97(110) mm
- Material: Plastic
- Product type: Pipes
- Width across flats: 24 mm
- Connection type: Clamp connection
Cookie Settings

We use different types of cookies to make our website better and smarter. These include cookies that are strictly necessary for the operation of the website, statistical cookies that help us better understand usage patterns, comfort cookies that allow us to offer various functions and services, and personalization cookies to provide you with content tailored to your interests.

Lauto law, we may store cookies on your device if they are strictly necessary for the operation of this website. For all other cookie types we need your permission. You may no longer be able to use all the functions of the website due to your settings.

Privacy policy
Legal notice