The EVSK 18-134 compressed air inlet manifold is primarily used as an inlet manifold in compressed air distribution. The connection hose from compressed air generation is connected directly to the EVSK 18-134 compressed air inlet manifold. The compressed air then flows through the EVSK 18-134 compressed air input distributor, via the plug-in connector into the plugged-in compressed air tube and can also be taken out via the quick coupling for blowing work in the compressed air generation area.
Note:
- The 18 mm plastic plug-in connector greatly facilitates installation with the corresponding plastic or aluminum piping from KDT. Please make sure that the compressed air pipe has been inserted at the correct insertion depth and is clamped by the internal retaining claw!
- KDT compressed air tube 18 mm outer diameter
Special features:
- Tightening torque brass thread core: max. 15 Nm
- Mounting hole: 4 x 6 mm - Operating pressure for plug-in connector/plastic: max. 10 bar at +23°C / max. 8 bar at +50°C
- Compressed air take-off with quick-action coupling NW 7.2 with profile sealing ring made of PTFE for gap sealing
- Compressed air outlet with plug connector plastic 18 mm - Compressed air inlet G 3/4" with threaded core made of brass
- Compressed air manifold VDK 31 complete with attachments (1 pc. screw-in plug connector, 1 pc. quick-lock coupling, 2 pcs. screw plug)
- Pay attention to frost endangered areas!
- Threaded connections are preferably intended for cylindrical threads (G)
- Screw in conical threads (R) with care and observe torque!
- Hole spacing: 73 x 48 mm (WxH)
- Medium compressed air, other operating temperatures and media on request!
- Nominal volume flow at 6 bar approx. 0.5 bar pressure difference
- Rear threaded connection Rp 1/2 "i can also be produced subsequently by drilling and thread cutting
- Quick-action coupling only pre-assembled, after installation the compressed air pipe can be blown out!
Technical data:
- Dimension: 102x68x102 mm
- Connection: axial
- Max. operating pressure: 10 bar
- Operating temperature: -20°C to +50°C
- Flow rate: 1.466 l/min
- Diameter: 18 mm
- Color: Grey
- Thread inside: G 3/4"
- Coupling type: quick coupling
- Length: 102 mm
- Material: plastic
- Product type: pipes
- Connection type: plug-in connection