The compressed air inlet manifold EVSM 18-112 is primarily used as an inlet manifold in compressed air distribution. The connection hose from compressed air generation is connected directly to the EVSM 18-112 compressed air inlet manifold. The compressed air then flows through the EVSM 18-112 compressed air input manifold, via the plug-in connector into the plugged-in compressed air tube and can also be taken out via the quick coupling for blowing work in the compressed air generation area.
Note:
- The 18 mm brass screw-in connector greatly facilitates installation with the corresponding plastic or aluminum piping from KDT. Please make sure that the compressed air pipe has been inserted at the correct insertion depth and is clamped by the internal retaining claw!
- KDT compressed air tube 18 mm outer diameter
Special features:
- Tightening torque brass thread core: max. 15 Nm
- Mounting hole: 4 x 6 mm
- Screw-in connector glued in with sealing ring PVC for gap sealing
- Compressed air take-off with quick-action coupling NW 7.2 with profile sealing ring made of PTFE for gap sealing
- Compressed air outlet with plug-in connector brass 18 mm - Compressed air inlet G 1/2" with threaded core made of brass
- Compressed air manifold VDK 21 complete with attachments (1 pc. screw-in plug-in connector, 1 pc. quick-locking coupling, 1 pc. screw plug)
- Pay attention to areas subject to frost!
- Threaded connections are preferably intended for cylindrical threads (G)
- Screw in conical threads (R) with care and observe torque!
- Hole spacing: 73 x 48 mm (WxH)
- Medium compressed air, other operating temperatures and media on request!
- Nominal volume flow at 6 bar approx. 0.5 bar pressure difference
- Rear threaded connection Rp 1/2 "i can also be produced subsequently by drilling and thread cutting
- Quick-action coupling only pre-assembled, after installation the compressed air pipe can be blown out!
Technical data:
- Dimension: 103x107x68 mm
- Connection: axial
- Max. operating pressure: 15 bar
- Operating temperature: -20°C to +50°C
- Flow rate: 1.466 l/min
- Diameter: 18 mm
- Color: Grey/Black
- Thread inside: G 1/2"
- Coupling type: quick coupling
- Length: 103 mm
- Material: plastic
- Product type: pipes
- Width across flats: 28 mm
- Connection type: plug-in connection