The compressed air inlet manifold EVSM 18-134 is primarily used as an inlet manifold in compressed air distribution. The connection hose from compressed air generation is connected directly to the EVSM 18-134 compressed air inlet manifold. The compressed air then flows through the EVSM 18-134 compressed air input manifold, via the plug-in connector into the inserted compressed air tube and can also be removed via the quick coupling for blowing work in the compressed air generation area.
Note:
- The 18 mm brass screw-in connector greatly facilitates installation with the corresponding plastic or aluminum piping from KDT. Please make sure that the compressed air pipe has been inserted at the correct insertion depth and is clamped by the internal retaining claw!
- KDT compressed air tube 18 mm outer diameter
Special features:
- Tightening torque brass thread core: max. 15 Nm
- Mounting hole: 4 x 6 mm
- Screw-in connector glued in with sealing ring PVC for gap sealing - Compressed air take-off with quick-action coupling NW 7.2 with PTFE profile sealing ring for gap sealing
- Compressed air outlet with brass 18 mm plug connector - Compressed air inlet G 3/4" with brass threaded core
- Compressed air distributor VDK 31 complete with attachments (1 screw-in plug connector, 1 quick-connect coupling, 2 screw plugs)
- Pay attention to areas subject to frost!
- Threaded connections are preferably intended for cylindrical threads (G)
- Screw in conical threads (R) with care and observe torque!
- Hole spacing: 73 x 48 mm (WxH)
- Medium compressed air, other operating temperatures and media on request!
- Nominal volume flow at 6 bar approx. 0.5 bar pressure difference
- Rear threaded connection Rp 1/2 "i can also be produced subsequently by drilling and thread cutting
- Quick-action coupling only pre-assembled, after installation the compressed air pipe can be blown out!
Technical data:
- Dimension: 95x107x68 mm
- Connection: axial
- Max. operating pressure: 15 bar
- Operating temperature: -20°C to +50°C
- Flow rate: 1.466 l/min
- Diameter: 18 mm
- Color: Grey/Gold
- Thread inside: G 3/4"
- Coupling type: quick coupling
- Length: 95 mm
- Material: plastic
- Product type: pipes
- Width across flats: 28 mm
- Connection type: plug-in connection
