The EVVA 15-2 M compressed air distributor enables compressed air to be extracted in a very confined space. The EVVA 15-2 M compressed air distributor is primarily used as an end distributor in compressed air distribution, and can be installed directly in the workplace area. The EVVA 15-2 M compressed air distributor has a mini shut-off ball valve G 1/2 "i in the inlet, which can be installed on an existing compressed air pipeline according to the requirements. The EVVA 15-2 M compressed air distributor consists of the inlet part and outlet part, which are connected with a detachable screw joint. The EVVA 15-2 M compressed air manifold can be multiplied with a DVN 1 through manifold, and thus adapted to higher compressed air requirements. Compressed air flows into the EVVA 15-2 M compressed air manifold, and can be taken out via the quick-release couplings for the compressed air applications. The mini shut-off ball valve can be easily closed with the toggle handle for the replacement of the quick-release couplings. Subsequent compressed air applications can be depressurized, or easily regulated. For clean room installations, or other individual compressed air distribution requirements, the rear threading option can be used to create another compressed air inlet, or outlet. To protect installed tools and machines, condensate can be drained manually from the EVVA 15-2 M compressed air distributor using the condensate drain. This increases safety and prevents increased wear. It can be attached to machine and system parts and to walls and ceilings.
Special features:
- Shut-off ball valve and condensate drain valve glued in with profile sealing ring made of PTFE for gap sealing
- Tightening torque thread plastic: 4 Nm
- Tightening torque thread brass: 15 Nm
- Mounting hole: 4 x 4.6 mm
- Sealing rings made of PVC
- Compressed air distributor can be extended individually (n-fold)
- Compressed air distributor VDK 138 complete with attachments (1 pc. mini shut-off ball valve, 2 compressed air distributors, 2 quick-connect couplings, 1 condensate drain valve)
- Pay attention to areas subject to frost!
- Threaded connections are preferably for cylindrical threads (G)
- Screw in conical threads (R) with care and observe torque!
- Plastic thread in the outlet
- Hole spacing: 46 x 36.5 mm (WxH)
- Detachable and metal-sealing screw connections
- Medium compressed air, other operating temperatures and media on request!
- Nominal volume flow at 6 bar approx. 0.5 bar pressure difference
- Rear threaded connection Rp 1/2 "i can also be made subsequently by drilling and thread cutting
Technical data:
- Dimension: 172(185)x60x74 mm
- Connection: vertical/top
- Max. operating pressure: 13 bar
- Operating temperature: -10°C to +50°C
- Flow rate: 1,166 l/min
- Color: gray
- Internal thread: G 1/2"
- Coupling type: Quick coupling
- Length: 172(185) mm
- Material: Plastic
- Product type: Accessories
- Connection type: Screw connection