The compressed air end distributor EVVASK 15-3 is primarily used as an end distributor in compressed air distribution. The compressed air end distributor EVVASK 15-3 has a screw-in connector and a shut-off ball valve with full bore in the inlet and can be installed directly on an existing compressed air pipeline. Compressed air flows into the EVVASK 15-3 compressed air end manifold and can be withdrawn via the quick-connect coupling for compressed air applications. The shut-off ball valve can be used to depressurize the EVVASK 15-3 compressed air end distributor, or subsequent compressed air applications, and to easily replace a defective quick-acting coupling. For installations in clean room technology, or for other individual requirements for compressed air distribution, the threading option at the rear can be used and an additional compressed air inlet, or even compressed air outlet can be produced. In order to protect installed tools and machines, the condensate produced can be drained manually from the EVVASK 22-3 compressed air end distributor. This increases safety and prevents increased wear. Mounting is possible on machine and plant parts, or on walls and ceilings.
- The 15 mm plastic plug-in connector greatly facilitates installation with the appropriate plastic or aluminum piping from KDT. Please make sure that the compressed air pipe has been inserted at the correct insertion depth and is clamped by the internal retaining claw!
- KDT compressed air pipe 15 mm outer diameter
- shut-off ball valve glued in with profile sealing ring made of PTFE for gap sealing
- tightening torque threaded core brass: max. 15 Nm
- fastening bore: 4 x 6 mm
- operating pressure for plug-in connector/plastic: max. 10 bar at +23°C / max. 8 bar at +50°C
- compressed air take-off with quick-action coupling NW 7.2 with profile sealing ring made of PTFE for gap sealing - Compressed air inlet with plug-in connector plastic 15 mm glued in with sealing ring made of PVC for gap sealing
- Compressed air distributor VDK 34 complete with attachments (1 pc. screw-in plug-in connector, 2 pc. quick-lock coupling)
- Pay attention to frost endangered areas!
- Threaded connections are preferably for cylindrical threads (G)
- Condensate drain valve glued in with profile sealing ring made of PVC for gap sealing
- Screw in conical threads (R) with care and observe torque!
- Hole spacing: 70 x 48 mm (WxH)
- Medium compressed air, other operating temperatures and media on request!
- Nominal volume flow at 6 bar approx. 0.5 bar pressure difference
- Rear threaded connection Rp 1/2 "i can also be produced subsequently by drilling and thread cutting
- Quick release couplings only pre-assembled, after installation the compressed air pipe can be blown out!
- Dimension: 135x125x87 mm
- Connection: axial
- Max. operating pressure: 10 bar
- Operating temperature: -20°C to +50°C
- Flow rate: 800 l/min
- Diameter: 15 mm
- Color: Grey/Black
- Coupling type: Quick release coupling
- Length: 135 mm
- Material: Plastic
- Product type: Pipes
- Width across flats: 25 mm
- Connection type: Plug-in connection