1. Home
  2. Druckluftverteilung
  3. Druckluftverteiler
  4. Compressed air distributor VDK 34-G (10 pcs.) 4 x G 1/2" End distributor box Plastic Grey
Hotline: +49 (0)7121 580002|E-Mail: info@druckluft-versandhandel.de
"
KDT

Compressed air distributor VDK 34-G (10 pcs.) 4 x G 1/2" End distributor box Plastic Grey

Item no.: 42093404
Druckluftverteiler VDK 34-G (10 St.) 4 x G 1/2 Druckluftverteiler VDK 34-G (10 St.) 4 x G 1/2 Druckluftverteiler VDK 34-G (10 St.) 4 x G 1/2
KDT
KDT

Compressed air distributor VDK 34-G (10 pcs.) 4 x G 1/2" End distributor box Plastic Grey

Item no.: 42093404
157,37 €
with payment in advance only 152,65 €
Content: 10 Stück (1 piece = 15,74 €)
Weight: 1,69 kg
incl. VAT plus Shipping costs Depending on the delivery address, the VAT in the shopping cart may vary.
Delivery time 1-3 working days (06.10.2022 - 10.10.2022)
In stock: 8 VE
Additional quantities within 10 working days.
Would you like help over the phone?
Use our free callback service
  • Description
    The VDK 34-G compressed air distributor is primarily used as a final distributor in compressed air distribution and enables a wide range of installation variants. The threaded connection in the inlet at the top is made of plastic. The threaded connections in the outlet at the front, have a threaded core made of brass and are thus protected against damage caused by frequent screwing in and out. The connections are sealed with suitable sealants. For clean room installations, or other individual compressed air distribution requirements, the threaded connection at the rear can be used to create an additional compressed air inlet, or outlet. The mounting is possible on machine and plant parts and on walls and ceilings.


    Note:
    The rear compressed air connection is created at the factory by drilling out and cutting the thread. It is advantageous to use a connection fitting that seals the plastic thread radially with an inserted sealing ring, and thus also optimally without a thread sealant.
    - Part no.: 360036 G 1/2 "a x G 1/2 "i - Part no.: 360037 G 1/2 "a x G 1/2 "a - Part no.: 360038 G 1/2 "a x G 3/4 "a


    Special features:
    - Connections outlet front: 3 x G 1/2 "i
    - Connections inlet: 1 x G 1/2"
    - Tightening torque thread plastic: 4 Nm
    - Tightening torque thread brass: 15 Nm
    - Mounting hole: 4 x 6 mm
    - Operating pressure static without equipment
    - Note frost endangered areas!
    - Threaded brass inserts in the front outlet
    - Threaded inserts twist-proof
    - Plastic thread in the inlet
    - Hole spacing: 70 x 45 mm (WxH)
    - Medium compressed air, other operating temperatures and media on request!
    - Production material and release agent are silicone-free
    - RoHS compliant
    - Rear threaded connection Rp 1/2" can also be produced subsequently by drilling and thread cutting


    Technical data:
    - Dimension: 85x60x50 mm
    - Max. operating pressure: 15 bar
    - Operating temperature: -20°C to +50°C
    - Color: Gray
    - Internal thread: G 1/2"
    - length: 85 mm
    - material: plastic
    - connection type: screw connection
Description
The VDK 34-G compressed air distributor is primarily used as a final distributor in compressed air distribution and enables a wide range of installation variants. The threaded connection in the inlet at the top is made of plastic. The threaded connections in the outlet at the front, have a threaded core made of brass and are thus protected against damage caused by frequent screwing in and out. The connections are sealed with suitable sealants. For clean room installations, or other individual compressed air distribution requirements, the threaded connection at the rear can be used to create an additional compressed air inlet, or outlet. The mounting is possible on machine and plant parts and on walls and ceilings.


Note:
The rear compressed air connection is created at the factory by drilling out and cutting the thread. It is advantageous to use a connection fitting that seals the plastic thread radially with an inserted sealing ring, and thus also optimally without a thread sealant.
- Part no.: 360036 G 1/2 "a x G 1/2 "i - Part no.: 360037 G 1/2 "a x G 1/2 "a - Part no.: 360038 G 1/2 "a x G 3/4 "a


Special features:
- Connections outlet front: 3 x G 1/2 "i
- Connections inlet: 1 x G 1/2"
- Tightening torque thread plastic: 4 Nm
- Tightening torque thread brass: 15 Nm
- Mounting hole: 4 x 6 mm
- Operating pressure static without equipment
- Note frost endangered areas!
- Threaded brass inserts in the front outlet
- Threaded inserts twist-proof
- Plastic thread in the inlet
- Hole spacing: 70 x 45 mm (WxH)
- Medium compressed air, other operating temperatures and media on request!
- Production material and release agent are silicone-free
- RoHS compliant
- Rear threaded connection Rp 1/2" can also be produced subsequently by drilling and thread cutting


Technical data:
- Dimension: 85x60x50 mm
- Max. operating pressure: 15 bar
- Operating temperature: -20°C to +50°C
- Color: Gray
- Internal thread: G 1/2"
- length: 85 mm
- material: plastic
- connection type: screw connection
Cookie Settings

We use different types of cookies to make our website better and smarter. These include cookies that are strictly necessary for the operation of the website, statistical cookies that help us better understand usage patterns, comfort cookies that allow us to offer various functions and services, and personalization cookies to provide you with content tailored to your interests.

Lauto law, we may store cookies on your device if they are strictly necessary for the operation of this website. For all other cookie types we need your permission. You may no longer be able to use all the functions of the website due to your settings.

Privacy policy
Legal notice