The GO 14 device lubricator can be used wherever compressed air tools require oil-containing compressed air for lubrication during continuous work (rotating compressed air tools such as, screwdrivers, grinders, etc. ..). Due to its light weight, installation is possible directly on the non-stationary air tools and other compressed air consumers. The GO 14 device lubricator can be easily and quickly installed in the compressed air supply, filled with oil and operated according to the oil quantity setting.
Dosage:
- The factory set dosage is approx. 50 mm³ per 1 m³ flow rate. One filling is sufficient for approx. 10 h at 100 Nl/min.
Note:
- Always install the GO 14 unit oiler so that the oil suction is always at the lowest point opposite the filling screw!
Special features:
- Flow direction as desired
- Observe areas at risk of frost!
- Material made of anodized aluminum / polycarbonate
- To be cleaned with water only!
- Volume flow: approx. 2000 L/min. (at 6 bar / dp=1.0 bar) approx. 1570 L/min. (at 6 bar / dp=0.5 bar)
- Oil suction at lowest point
- Oil quantity dosage not adjustable!
- Oil grade: 22 cSt. to 32 cSt.
Technical data:
- dimension: 63x34x37 mm
- connection: axial
- working pressure: +4 bar to +7 bar
- max. working pressure: 8 bar
- min. working pressure: 0.5 bar
- working temperature: +2°C to +55°C
- flow rate: 2.000 l/min
- color: silver
- external thread: G 1/4"
- internal thread: G 1/4"
- Length: 63 mm
- Material: aluminum
- Product type: Accessories
- Width across flats: 17 mm
- Connection type: screw connection
- Volume: approx. 5.5 ml
