The EV 12-G3 compressed air distributor is primarily used as an end distributor in compressed air distribution and is installed directly in the workplace area. The compressed air distributor EV 12-G3 has a threaded connection with G 1/2 "i in the inlet, which can be installed on an existing compressed air pipeline according to the requirements. The compressed air then flows into the EV 12-G3 compressed air manifold and can be taken out via the quick-release couplings for the compressed air applications. For clean room installations or other individual requirements for the EV 12-G3 compressed air manifold, the threaded connection at the rear can be used to create another compressed air inlet, or outlet. The mounting is possible on machine and plant parts, as well as on walls and ceilings
Note:
If the compressed air is humid, condensate can form!
If this is the case, we recommend the compressed air distributor EVV 12-G3. Here, accumulating condensate can be drained manually from the compressed air distributor EVV 12-G3 with the condensate drain, so that installed tools and machines are protected!
Special features:
- Tightening torque thread plastic: 4 Nm
- Tightening torque thread brass: 15 Nm
- Mounting hole: 4 x 6 mm
- Sealing ring made of PTFE for quick-connect couplings
- Compressed air distributor VDK 34 complete with attachments (3 pcs. quick-connect coupling)
- Pay attention to areas subject to frost!
- Threaded connections are preferably provided for cylindrical threads (G)
- Threaded inserts made of plastic in the inlet at the top and brass in the outlet at the front
- Threaded inserts twist-proof
- Screw in conical threads (R) with care and observe torque! - Hole spacing: 70 x 45 mm (WxH)
- Medium compressed air, other operating temperatures and media on request!
- After installation the compressed air pipe can be blown out because quick coupling NW 7.2 only pre-assembled
- Nominal volume flow at 6 bar approx. 0.5 bar pressure difference
- Rear threaded connection Rp 1/2 "i can also be made later by drilling and thread cutting
Technical data:
- Dimension: 60x126x86 mm
- Connection: axial
- Max. operating pressure: 15 bar
- Operating temperature: -20°C to +50°C
- Flow rate: 1,466 l/min
- Color: Gray
- Thread inside: G 1/2"
- Coupling type: quick coupling
- Length: 60 mm
- Material: plastic
- Product type: pipes
- Connection type: screw connection
